Jaw Coupling

Two metal hubs with interlocking jaws and a flexible spider between them. The spider takes up shock and small misalignment between motor and machine.

Fail-safe: if the spider wears out, the jaws keep driving.
Choose the spider for the load: NBR for general use, urethane for more torque, Hytrel for the most.
Lovejoy L-type and KTR Rotex hubs and spiders do not interchange.
Hubs are bored to your shafts. Pick both bores when you open a part.

Photo coming soon

The photo shows what the part looks like. Letters on the drawing match the table columns; point at one to see where it is measured.

Not sure which type? Compare them

Type	Misalignment	Backlash	Shock damping	Torque	Best for
Jaw CouplingYou are here	Low, about 1°	Low	Good	3–1,100 Nm	Motors to pumps, fans and gearboxes; fail-safe
Pin Bush Coupling	Low, about 0.5°	Low	Good	50–50,000 Nm	Large motors in heavy industry; bushes change easily
Tyre Coupling	High, up to 4°	Some	Very good	24–6,300 Nm	Shock loads and shafts that are hard to align
Gear Coupling	Medium, about 1.5°	Some	None	500–100,000 Nm	Very high torque in a small size; needs grease
Resilient Coupling	Medium	Low	Very good	100–50,000 Nm	Diesel engines and drives with torsional vibration
Disc Coupling	Low, about 1°	Zero	None	50–10,000 Nm	High speed and precision, no lubrication
Servo Coupling	Low to medium	Zero	None	0.5–500 Nm	Servo motors, encoders and ball screws
Chain Coupling	Low, about 1°	Some	None	50–20,000 Nm	Simple, compact drives; easy to disconnect
Torque Limiter	Depends on the drive it carries	Low	None	2–5,000 Nm slip setting	Protecting machines from jams and overloads
Nylon Gear Coupling	Medium, about 1°	Low	Some	10–2,000 Nm	Pumps and general drives; no lubrication, quiet
Locking Assembly	None, it is a rigid shaft-hub joint	Zero	None	20–100,000 Nm	Fixing pulleys, sprockets and hubs to a shaft without a keyway

Find a coupling for your drive

Fill in what you know. Each value narrows the table; leave the rest blank.

Motor shaft ØmmDriven shaft ØmmMotor powerkWSpeedrpmLoad type

Fill in any field to narrow the table below.

Choose a model · pick one or more, or leave all off to see every model

Hub material

Spider

Rated torque

50 of 50 parts match

Part no.	Size	Hub material	Spider	Bore rangedmm	Outer ØAmm	Overall lengthBmm	Rated torqueNm	Max speedrpm	Priceex GST
Lovejoy L-type28 parts · Straight jaws with a cushioning NBR spider between the hubs. Sintered iron, aluminium or cast-iron hubs. Interchanges with most L-type couplings.
L099-NBR-CI	L-099	Cast iron	NBR	10–30	65	72	35.1	–	₹2,030
L099-NBR-AL	L-099	Aluminium	NBR	10–30	65	72	35.1	–	₹2,310
L095-NBR-CI	L-095	Cast iron	NBR	10–28	54	63	21.1	–	₹1,540
L095-NBR-AL	L-095	Aluminium	NBR	10–28	54	63	21.1	–	₹1,760
L050-NBR-SI	L-050	Sintered iron	NBR	5–16	27	42	2.8	–	₹710
L050-NBR-AL	L-050	Aluminium	NBR	5–16	27	42	2.8	–	₹850
L075-NBR-SI	L-075	Sintered iron	NBR	9–22	44.5	55	9.8	–	₹1,140
L075-NBR-AL	L-075	Aluminium	NBR	9–22	44.5	55	9.8	–	₹1,370
L070-NBR-SI	L-070	Sintered iron	NBR	9–20	36	51	4.9	–	₹900
L070-NBR-AL	L-070	Aluminium	NBR	9–20	36	51	4.9	–	₹1,080
L100A-NBR-CI	L-100A	Cast iron	NBR	10–35	65	88	46.4	–	₹2,030
L100A-NBR-AL	L-100A	Aluminium	NBR	10–35	65	88	46.4	–	₹2,310
L100-NBR-CI	L-100	Cast iron	NBR	10–38	65	88	46.4	–	₹2,030
L100-NBR-AL	L-100	Aluminium	NBR	10–38	65	88	46.4	–	₹2,310
L295-NBR-CI	L-295	Cast iron	NBR	30–95	237	238	1,279	–	₹21,110
L190-NBR-CI	L-190	Cast iron	NBR	15–60	115	133	190	–	₹5,330
L190-NBR-AL	L-190	Aluminium	NBR	15–60	115	133	190	–	₹6,090
L225-NBR-CI	L-225	Cast iron	NBR	15–65	127	153	265	–	₹6,400
L276-NBR-CI	L-276	Cast iron	NBR	25–75	157	200	532	–	₹9,530
L350-NBR-CI	L-350	Cast iron	NBR	30–115	305	309	4,308	–	₹34,660
L280-NBR-CI	L-280	Cast iron	NBR	30–80	192	200	782	–	₹14,020
L226-NBR-CI	L-226	Cast iron	NBR	25–70	137	178	327	–	₹7,370
L300-NBR-CI	L-300	Cast iron	NBR	30–105	254	283	3,047	–	₹24,180
L150-NBR-CI	L-150	Cast iron	NBR	15–48	96	115	141	–	₹3,860
L150-NBR-AL	L-150	Aluminium	NBR	15–48	96	115	141	–	₹4,410
L110-NBR-CI	L-110	Cast iron	NBR	15–42	85	108	89	–	₹3,130
L110-NBR-AL	L-110	Aluminium	NBR	15–42	85	108	89	–	₹3,570
L2955-NBR-CI	L-2955	Cast iron	NBR	30–105	237	264	2,132	–	₹21,110
Lovejoy SW Snap Wrap22 parts · Jaw coupling with a wrap-around NBR element held by a steel ring. The element is inspected or replaced in minutes without moving the motor or the driven machine.
SW095-NBR-CI	SW-095	Cast iron	NBR	10–28	65	63	21.1	–	₹2,530
SW095-NBR-AL	SW-095	Aluminium	NBR	10–28	65	63	21.1	–	₹2,890
SW150-NBR-CI	SW-150	Cast iron	NBR	15–48	111	115	141	–	₹6,250
SW150-NBR-AL	SW-150	Aluminium	NBR	15–48	111	115	141	–	₹7,140
SW100-NBR-CI	SW-100	Cast iron	NBR	10–38	78	88	46.4	–	₹3,390
SW100-NBR-AL	SW-100	Aluminium	NBR	10–38	78	88	46.4	–	₹3,870
SW276-NBR-CI	SW-276	Cast iron	NBR	25–75	173	200	532	–	₹14,340
SW099-NBR-CI	SW-099	Cast iron	NBR	10–30	78	72	35.1	–	₹3,390
SW099-NBR-AL	SW-099	Aluminium	NBR	10–30	78	72	35.1	–	₹3,870
SW2955-NBR-CI	SW-2955	Cast iron	NBR	30–105	253	264	2,132	–	₹29,990
SW280-NBR-CI	SW-280	Cast iron	NBR	30–80	208	200	782	–	₹20,470
SW226-NBR-CI	SW-226	Cast iron	NBR	25–70	153	178	327	–	₹11,340
SW190-NBR-CI	SW-190	Cast iron	NBR	15–60	129	133	190	–	₹8,240
SW190-NBR-AL	SW-190	Aluminium	NBR	15–60	129	133	190	–	₹9,410
SW350-NBR-CI	SW-350	Cast iron	NBR	30–115	323	309	4,308	–	₹48,520
SW300-NBR-CI	SW-300	Cast iron	NBR	30–105	272	283	3,047	–	₹34,580
SW225-NBR-CI	SW-225	Cast iron	NBR	15–65	142	153	265	–	₹9,850
SW110-NBR-CI	SW-110	Cast iron	NBR	15–42	96	108	89	–	₹4,820
SW110-NBR-AL	SW-110	Aluminium	NBR	15–42	96	108	89	–	₹5,510
SW100A-NBR-CI	SW-100A	Cast iron	NBR	10–35	78	88	46.4	–	₹3,390
SW100A-NBR-AL	SW-100A	Aluminium	NBR	10–35	78	88	46.4	–	₹3,870
SW295-NBR-CI	SW-295	Cast iron	NBR	30–95	253	238	1,279	–	₹29,990

Lovejoy L-type28 parts · Straight jaws with a cushioning NBR spider between the hubs. Sintered iron, aluminium or cast-iron hubs. Interchanges with most L-type couplings.

Lovejoy SW Snap Wrap22 parts · Jaw coupling with a wrap-around NBR element held by a steel ring. The element is inspected or replaced in minutes without moving the motor or the driven machine.