Couplings · products coming soon
Gear Coupling
Crowned gear teeth on each hub mesh with a sleeve. The most torque in the smallest size, for heavy drives.
- Full-flex couplings take angular and parallel misalignment; flex-rigid take angular only.
- Needs grease: check and refill at regular intervals.
- Spacer versions leave room to pull a pump without moving the motor.
Photo coming soon
Not sure which type? Compare them
| Type | Misalignment | Backlash | Shock damping | Torque | Best for |
|---|---|---|---|---|---|
| Jaw Coupling | Low, about 1° | Low | Good | 3–1,100 Nm | Motors to pumps, fans and gearboxes; fail-safe |
| Pin Bush Coupling | Low, about 0.5° | Low | Good | 50–50,000 Nm | Large motors in heavy industry; bushes change easily |
| Tyre Coupling | High, up to 4° | Some | Very good | 24–6,300 Nm | Shock loads and shafts that are hard to align |
| Gear CouplingYou are here | Medium, about 1.5° | Some | None | 500–100,000 Nm | Very high torque in a small size; needs grease |
| Resilient Coupling | Medium | Low | Very good | 100–50,000 Nm | Diesel engines and drives with torsional vibration |
| Disc Coupling | Low, about 1° | Zero | None | 50–10,000 Nm | High speed and precision, no lubrication |
| Servo Coupling | Low to medium | Zero | None | 0.5–500 Nm | Servo motors, encoders and ball screws |
| Chain Coupling | Low, about 1° | Some | None | 50–20,000 Nm | Simple, compact drives; easy to disconnect |
| Torque Limiter | Depends on the drive it carries | Low | None | 2–5,000 Nm slip setting | Protecting machines from jams and overloads |
| Nylon Gear Coupling | Medium, about 1° | Low | Some | 10–2,000 Nm | Pumps and general drives; no lubrication, quiet |
| Locking Assembly | None, it is a rigid shaft-hub joint | Zero | None | 20–100,000 Nm | Fixing pulleys, sprockets and hubs to a shaft without a keyway |
Find a coupling for your drive
Fill in what you know. Each value narrows the table; leave the rest blank.
Fill in any field to narrow the table below.
Choose a model · pick one or more, or leave all off to see every model
Products coming soon
Gear Coupling sizes are being added. Meanwhile, send us your shaft sizes and torque and we will quote.